My Family Scrapbook

Wednesday, November 28, 2012

Ornaments in 3D

As I progress through learning this craft I want to try new things and different techniques. I don't want my new hobby to get stale and I don't want to become board. (No pun intended but you have to admit that was funny.)

Not everything is flat or lifeless. Many projects have movement and/or dimension.

Today I am sharing the 3D ornaments and one that has some movement to it.

This first one is a free pattern that I found on a magazine site that I have to tell you I love! There is a message forum there that you can post issues, pictures, or visit with other wood artist. This site has been a wealth of information for me. With it's many tips, tricks, and many how-to and free patterns this has turned out to be one of my favorite sites. The site is for Scroll Saw Woodworking & Crafts. Here is a direct link to this first 3D "snowflake" ornament. I used red oak, finished in natural, and the finished size is approximately 4 inches.

Did I mention I have made a few friends there as well. Everyone at that site are very kind and when I posted my very first project no one laughed at me, they encouraged me! (And that first project wasn't awful but it also wasn't a prize either!)

The second ornament today I found in a magazine. In fact is is the magazine from the website above. I love that the magazine is full of success stories, articles, and a wealth of ads for useful woodworking products, BUT, you knew there would be a but, I would be lying if I didn't tell you I love that magazine for the pattern! My ornament is cut from red oak, finished in golden pecan, and is about 5 inches tall.

One last ornament today is not exactly 3d but rather one that has a little movement to it. The pattern for this called it a "mobile," but I re-sized it so that it could me an ornament. This ornament has a star suspended within another star. It posed a challenge for me but I love a challenge. I found this at an on-line site called Scroll Saw Village. Here is the direct link to the pattern. My ornament is 6 inches tall, cut from red oak, finished in natural stain.

The star on the inside moves back and forth and is suspended there with fishing line.  I tried other things like a metal jump ring but either they were not small enough to go through that very small hole I drilled or they were not a large enough jump ring to go through the 1/4 inch wood.  (See Challenges!  The other challenge was cutting that very small star.)

That is the end of my ornaments for this Christmas season. I am sure there will be more ornaments made but for now I am moving on to a few scroll sawed gifts.

Happy Crafting ! ! !


Monday, November 26, 2012

Traditional Icons in Ornaments

Today I am going to post a few of the traditional icons of Christmas for little ones.  While I am typing this post I am humming "Here Comes Santa Clause"

Santa, aside from baby Jesus, has to be the most recognized Christmas symbol.  He hasn't been lost on the 50 year old!  I have been cutting a few the Jolly Old Man, along with a few other Christmas favorites.

Here are the Santa ornaments that I have busy with.

The first one is the very first ornament that I cut out.  I have cut about 10 of these out this year:

The next one shows Santa as the "Star of Christmas" for the little ones:

And then of course you have the Jolly Old Santa delivering his gifts:

One last ornament today is that filled stocking!  Every child loves getting it and some of the best gifts are the small ones that Santa leaves in the stocking!

My next set of ornaments will be the 3d ones instead of the flat ones.  Everyone has to have a little dimension on the tree.

Happy Crafting ! ! !


Wednesday, November 21, 2012

Angels For The Tree

Today is all about the angel ornaments I have made. I think that there must be thousands of different angel patterns available for the scroll saw. I only wish there was more time to cut more of these before Christmas.

I've had a lot of people ask me if I could make them one or more of them.

There are wall plaques, ornaments, fretwork, intarsia, and compound angels. I made several of each of these angels this year. Mine are all ornaments and done in fretwork. I cut 3 or more of each of these. I have 4 or 5 more ready to cut but time is getting away from me and I had to stop cutting so many ornaments and get back to the items that I need to complete for gifts.

For these angels, I used 1/4 inch red oak and the average size of them are 4 to 6 inches tall. They are finished with golden oak, pecan, and natural finishes.

The very first angel that I completed is this one:

I fell in love with her and just had to cut several. That was before I started finding all of these other angels! I found them in magazines, books, and on-line.

Here are several that I found in a Scroll Saw Magazine. There are several more of these filigree angels but these are the ones that I liked the best:

The first one is the only ornament that I cut using Poplar wood.  The grain is not as visible as with red oak but the wood is sturdier.  

This one and the ones to follow are more of the red oak.

This last one I revamped the pattern because I, personally, thought that she looked like she had a set of arms that went up and legs that went down, and then her skirt came from between the legs. I thinned the wing so that it no longer looks like arms going up, lowered the head, and make what originally looked like legs be the arms and she looks more balanced to me. I like the end result:

And finally this angel is by far may favorite of all of the ones I have cut. I am not sure if it is the double heart that I like or if it is her delicate features and double ruffled skirt.

As I finish other angels I will post them but this is all I am planning on making for this holiday season.

Happy Crafting ! ! !


Monday, November 19, 2012

Let It Snow - Snowman Ornaments

I said in my last post that the last two snowflakes would be a hint as to the next post. SNOWMEN!

I have several people on my Christmas List who decorate with or collect snowmen. I can use these as a decoration on a package (as with all of the ornaments that I have made this year)in place of a tag. Since these are thin I can include them in a card that I mail. I can also give these as a gift or as a party favor. The possibilities with the ornaments are endless.

There are hundreds of snowmen patterns out there to purchase or swap if you have a friend who designs patterns.

I love the snowmen because they are a winter decoration and not limited to just Christmas. They can be left out longer than a Santa decoration.

I hope you enjoy decorating for the holidays.

Next post will be more ornaments to celebrate the season!

Happy Crafting ! ! !


Friday, November 16, 2012

Symbols of Christmas

Today I am sharing some of the ornaments that remind me of Christmas. I know there is the nativity, the tree, stars, and so many other icons that scream Christmas but these are the ones that remind me of my childhood.

There is the traditional Christmas Candle. I can remember my mom loading all of us up in the car and we would drive around town and look at the beautiful Christmas decorations on the town's people houses and in their yards. I loved the single candles perched in each window of many of the houses.

So for all of those who put the "Light Of Jesus" in the windows, this is in your honor.

Then there was the traditional Christmas Cookie baking day. Mom would get everything organized and allow me to bake and decorate cookies for not only our cookie jar but to give as gifts. The tradition of the Gingerbread Man brings back many memories and smiles.

The last 2 for today brings wishes for the upcoming Christmas season. There is something magical about wanting and wishing for a white Christmas, the snowflake. This also brings memories of Christmases that we woke to a fresh blanket of white glistening snow or watching "White Christmas" on TV. I can still hear the old saying that no two snowflakes are a like.

Those last 2 will also bring on the next posts themed ornaments.

Happy Crafting ! ! !


Wednesday, November 14, 2012

Time for Christmas Ornaments

I was sitting here looking at all of the pictures of the ornaments that I have made and trying to figure out how to present them here on my blog.

I have decided that I would group them according to theme.

Today I will be sharing my ornaments that are not necessarily just for Christmas or what I call alternative ornaments.

The first one I made in memory of my dad. He loved hummingbirds and I made 2 of these. One I took out to his grave and hung it from the flowers that my mom had put in the vase. Dad was the one who got me interested in the woodworking. Then my son came to me and asked if he could have the other one for his mother-in-law, and I allowed him to have it.

The next one I did for my husband and son who love to fish. Both of them like putting items on the tree that interests them. When I gave my husband his, he made the comment that it looked like a tree instead of a fish. I had to laugh but he was right, if you hold it at just the right angle it does look like a tree!

Then the next 2 ornaments that I am sharing today were part of an ornament swap that I did with long-distance girlfriends. My one friend, Jessica, who lives in California decorates for the holidays with mice. I made her 2 ornaments because the first one I didn't like after I made it but didn't want to throw it away either. The 2nd one looks like a Christmas ornament because the mouse is holding an ornament.

Then there are a couple of very special ornaments that I want to share. The first one is for my mail carrier. This man goes out of his way to make sure that our mail is safely in our box and the top is closed. We can always tell when Ed, the mailman, is having a day off! For him I spent time making a stamp with a mailman inside the stamp. He will receive this and a small box of cookies.

One last ornament for today.... the school mascot. It is special indeed! A tribute to the Jerseyville Panthers!

So in the next few days I will post a few more Christman ornaments that are more traditionalin theme. I am starting to get into the Christmas spirit.

Happy Crafting ! ! !


Wednesday, November 7, 2012

Last Trivet For Now

I have so many other things to share that I have made and am making that after this post I will be sharing my Christmas ornaments.  But first one last trivet.

I was approached by a very dear friend to make something, anything for a benefit auction to help a local young man that has a brain tumor.  I thought about it and decided to make a "dog and butterfly trivet" for the silent auction. 

Here is the finished piece.  Like the last trivet that I shared, I rountered the upper edge so that it has a rounded finished look.

I am praying for a cure for this great young man.

I also that by sharing this with you that it inspires you to reach out and help others.  God gives us these talents for a reason.  I only hope that I am using my talent the way God wants me to.

Happy Crafting ! ! !


Monday, November 5, 2012

Only 2 Trivets Left To Share

This is the next to the last Trivet that I will be sharing for awhile.

This one also has my first attempt at using a router. I am all for trying new and different things. I love the rounded edge that the router provides that I could not get my sanding alone.

The pattern for this came from an internet site called:  Free Scroll Saw Patterns by Arpop This site is full of free downloadable patterns. 

Here is the wooden trivet that I made using one of his trivet patterns:

Here is a closer look at that routered edge that I talked about before:

There is only one more trivet left this round and then I am moving on to so me of the Christmas ornaments that I am making!

Happy Crafting ! ! !


Friday, November 2, 2012

Trivet - Also From An Ornament Pattern

This is one of my favorites that I have made so far. The pattern came out of a book called "Holiday Ornaments for the Scroll Saw." So you can see where this is going, right? The difference is that I did not make any changes to this pattern. I just made it bigger!

The book is evidently an out of print book. I found the book at my local library but fell in love with the patterns. I did a little research and could find it on Amazon BUT the prices for this out of print book there range from $46 to $225, which I personally think is outrageous but I am sure there are people out there that would pay that if they wanted it bad enough. I took a second route in finding the book and decided to check out eBay. I got it for a mere $9.95 plus $3.95 shipping, which was less than the original price of the book.

Here is the finished trivet:

Like I said this is my favorite to date.

Happy Crafting ! ! !